Cominv Vintage Filament Two-Tier Chandelier 38", 50", 63", 73"

With its grand scale and hand-forged presence, this chandelier makes a profoundly elegant statement. Drawing directly from early 20th-century industrial fixtures, its stout angle iron construction embodies a rustic authenticity, where simplicity of form becomes the ultimate sophistication.

38"

Overall: 38¾" diam., 37"H
Canopy: 5¼" diam., 1¼"H
Minimum Height: 40¼"
Maximum Height: 82¼"
Rods: one 6", three 12"
Cord: 8'4"L
Body: 15"H (without bulbs)
Top Tier: 38¾" diam.
Bottom Tier: 26¾" diam.
Weight: 43 lbs.

50"

Overall: 50¾" diam., 42½"H
Canopy: 5¼" diam., 1¼"H
Minimum Height: 45¾"
Maximum Height: 87¾"
Rods: one 6", three 12"
Cord: 8'4"L
Body: 14¼"H (without bulbs)
Top Tier: 50¾" diam.
Bottom Tier: 38¾" diam.
Weight: 57 lbs.

63"

Overall: 62¾" diam., 49¼"
Canopy: 5¼" diam., 1¼"H
Minimum Height: 52½"
Maximum Height: 94½"
Rods: one 6", three 12"
Cord: 8'4"L
Body: 14¼"H (without bulbs)
Top Tier: 62¾" diam.
Bottom Tier: 50¾" diam.
Weight: 67 lbs.

73"

Overall: 72¾" diam., 54"H
Canopy: 5¼" diam., 1¼"H
Minimum Height: 57"
Maximum Height: 99"
Rods: one 6", three 12"
Cord: 8'4"L
Body: 14¾"H (without bulbs)
Top Tier: 72¾" diam.
Bottom Tier: 62¾" diam.
Weight: 88 lbs.

Hand-forged and bent angle-iron rings, edged by upraised bulbs
Sheet metal wraps the sockets
Cast ceiling plate has a textured finish
Rated for thirty/ forty-two/ fifty-four/ sixty-six 15W max. E12 candelabra bulbs
Tube bulbs included
If brighter light is preferred, consider an LED bulb with a higher lumen output.
Dimmer switch compatible
Can be mounted on a vaulted ceiling
Rods included; optional extension rod (sold separately) adds length to fixture
110-120V manufactured to US standards for US and Canadian markets
Certified to Dry UL electrical standard: suitable for use indoors in dry locations not directly exposed to excessive moisture and water
Hardwire
Requires installation by a licensed electrician. IChandelier delivery service does not include installation.
Wipe with a soft, dry cloth; avoid the use of all cleaners and abrasives, as they will damage the finish