Cominv Round Outdoor Chandelier 26", 38", 50", 63", 73"

With its grand scale and hand-forged presence, this chandelier makes a profoundly elegant statement. Drawing directly from early 20th-century industrial fixtures, its stout angle iron construction embodies a rustic authenticity, where simplicity of form becomes the ultimate sophistication.

26"

Overall: 26¾" diam., 19"H
Canopy: 5¼" diam., 1¼"H
Minimum Height: 22"
Maximum Height: 64"
Rods: one 6", three 12"
Cord: 8'4"L
Body: 3½"H (without bulbs)
Weight: 18 lbs.

38"

Overall: 39½" diam.
Canopy: 5¼" diam., 1¼"H
Rods: two 6", two 12", two 18"
Minimum Height: 29"
Maximum Height: 101"
Body: 7"H (with bulbs)
Cord: 11'4"L
Weight: 37 lbs.

50"

Overall: 50¾" diam., 31¾"H
Canopy: 5¼" diam., 1¼"H
Minimum Height: 35"
Maximum Height: 77"
Rods: one 6", three 12"
Cord: 8'4"L
Body: 3½"H (without bulbs)
Weight: 37 lbs.

63"

Overall: 62¾" diam., 38¼"H
Canopy: 5¼" diam., 1¼"H
Minimum Height: 41½"
Maximum Height: 83½"
Rods: one 6", three 12"
Cord: 8'4"L
Body: 3½"H (without bulbs)
Weight: 40 lbs.

73"

Overall: 72¾" diam., 42½"H
Canopy: 5¼" diam., 3½"H
Minimum Height: 45½"
Maximum Height: 87½"
Rods: one 6", three 12"
Cord: 8'4"L
Body: 3½"H (without bulbs)
Weight: 49 lbs.

Hand forged and bent angle-iron ring, edged by upraised bulbs
Cast ceiling plate has a lightly textured finish
Rated for twelve/ eighteen/ twenty/ thirty/ thirty-six 15W max. E12 candelabra bulbs
Bulbs included
If brighter light is preferred, consider an LED bulb with a higher lumen output.
Dimmer switch compatible
Rod comes in connectable segments for a customizable length
Can be mounted on a vaulted ceiling
110-120V manufactured to US standards for US and Canadian markets
Certified to Wet UL electrical standard: suitable for use indoors or outdoors, including areas that receive direct contact with rain, snow or excessive moisture
Hardwire
Requires installation by a licensed electrician. IChandelier delivery service does not include installation.
Wipe with a soft, dry cloth; avoid the use of all cleaners and abrasives, as they will damage the finish